bf

rasp_grid.py

@@ -17,20 +17,23 @@ from IPython import embed
 from uldaq import (get_daq_device_inventory, DaqDevice, AInScanFlag, ScanStatus,
                    ScanOption, create_float_buffer, InterfaceType, AiInputMode)
 
-def GPIO_setup():
+def GPIO_setup(LED1_pin, LED2_pin, Button1_pin, Button2_pin):
     # LED output pins
     GPIO.setmode(GPIO.BOARD)
 
-    GPIO.setup(11, GPIO.OUT)  # 1
-    GPIO.output(11, GPIO.LOW)
-    GPIO.setup(13, GPIO.OUT)  # 2
-    GPIO.output(13, GPIO.LOW)
+    GPIO.setup(LED1_pin, GPIO.OUT)  # 1
+    GPIO.output(LED1_pin, GPIO.LOW)
+    GPIO.setup(LED2_pin, GPIO.OUT)  # 2
+    GPIO.output(LED2_pin, GPIO.LOW)
 
     LED_status = [False, False]
 
     # switch controlled input
-    GPIO.setup(16, GPIO.IN)
-    GPIO.setup(18, GPIO.IN)
+    GPIO.setup(Button1_pin, GPIO.IN)
+    GPIO.setup(Button2_pin, GPIO.IN)
+
+    # GPIO.setup(Button1_pin, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
+    # GPIO.setup(Button2_pin, GPIO.IN, pull_up_down=GPIO.PUD_DOWN)
 
     return LED_status
 
@@ -170,16 +173,21 @@ def main():
     file = os.path.join(path, 'traces-grid1.raw')
     f = open(file, 'wb')
 
-    f.close()
+    # f.close()
 
     embed()
     quit()
 
-    LED_status = GPIO_setup()
+    LED1_pin = 11
+    LED2_pin = 13
+    Button1_pin = 16
+    Button2_pin = 18
+
+    LED_status = GPIO_setup(LED1_pin, LED2_pin, Button1_pin, Button2_pin)
 
     # DAQ setup
     if True:
-        channels = 16
+        # channels = 16
 
         status = ScanStatus.IDLE
 
@@ -191,7 +199,7 @@ def main():
         high_channel = channels
 
         samples_per_channel = 20000  # ToDo: ???? Buffer size ?!
-        rate = 20000
+        # rate = 20000
         scan_options = ScanOption.CONTINUOUS
         flags = AInScanFlag.DEFAULT
 
@@ -250,7 +258,7 @@ def main():
         rate = ai_device.a_in_scan(low_channel, high_channel, input_mode, ranges[range_index], samples_per_channel,
                                    rate, scan_options, flags, data)
         last_idx = 0
-        f = open('/media/pi/data1/test_file.raw', 'wb')
+        # f = open('/media/pi/data1/test_file.raw', 'wb')
 
 
     # LED on when here ... wait for switch to start data aquisition