fixing seg fault by returning data_analog_output

pyrelacs/repros/calbi.py

@@ -1,34 +1,57 @@
 import ctypes
+import faulthandler
+
+import time
 
 import uldaq
 from IPython import embed
-from pyrelacs.repros.repos import Repos
-from pyrelacs.util.logging import config_logging
 import numpy as np
 import matplotlib.pyplot as plt
 
+from pyrelacs.repros.mccdac import MccDac
+from pyrelacs.util.logging import config_logging
+
 log = config_logging()
+faulthandler.enable()
 
 
-class Calibration(Repos):
+class Calibration(MccDac):
     def __init__(self) -> None:
         super().__init__()
 
-    def run_calibration(self):
+    def check_amplitude(self):
-        # Stimulus
+        self.set_attenuation_level(db_channel1=0.0, db_channel2=0.0)
-        time = np.arange(0, DURATION, 1 / SAMPLERATE)
+        # write to ananlog 1
-        data = AMPLITUDE * np.sin(2 * np.pi * SINFREQ * time)
+        t = np.arange(0, DURATION, 1 / SAMPLERATE)
-        # sending stimulus
+        data = AMPLITUDE * np.sin(2 * np.pi * SINFREQ * t)
-        stim, ao_device = self.send_analog_dac(
+        data_channels = np.zeros(2 * len(data))
-            data, [0, 0], SAMPLERATE, ScanOption=uldaq.ScanOption.EXTTRIGGER
+        # c = [(i,for i,j in zip(data, data)]
+
+        stim = self.write_analog(
+            data,
+            [0, 0],
+            SAMPLERATE,
+            ScanOption=uldaq.ScanOption.EXTTRIGGER,
         )
-        read_data = self.read_analog_daq(
+        data_channel_one = self.read_analog(
-            [0, 1], DURATION, SAMPLERATE, ScanOption=uldaq.ScanOption.EXTTRIGGER
+            [0, 0], DURATION, SAMPLERATE, ScanOption=uldaq.ScanOption.EXTTRIGGER
         )
-        self.digital_trigger()
+        time.sleep(1)
-        ao_device.scan_wait(uldaq.WaitType.WAIT_UNTIL_DONE, 11)
+
-        self.digital_trigger(data=0)
+        self.diggital_trigger()
-        self.disconnect_dac()
+
+        try:
+            self.ai_device.scan_wait(uldaq.WaitType.WAIT_UNTIL_DONE, 15)
+            self.write_bit(channel=0, bit=0)
+            time.sleep(1)
+            self.set_analog_to_zero()
+        except uldaq.ul_exception.ULException:
+            log.debug("Operation timed out")
+            # reset the diggital trigger
+            self.write_bit(channel=0, bit=0)
+            time.sleep(1)
+            self.set_analog_to_zero()
+            self.disconnect_dac()
         embed()
         exit()
 
@@ -36,7 +59,9 @@ class Calibration(Repos):
 if __name__ == "__main__":
     SAMPLERATE = 40_000.0
     DURATION = 5
-    AMPLITUDE = 3
+    AMPLITUDE = 0.5
-    SINFREQ = 1
+    SINFREQ = 10
-    daq_input = Calibration()
+
-    daq_input.run_calibration()
+    cal = Calibration()
+    # cal.ccheck_attenuator()
+    cal.check_amplitude()

pyrelacs/repros/input.py

@@ -2,12 +2,12 @@ import uldaq
 import matplotlib.pyplot as plt
 
 from pyrelacs.util.logging import config_logging
-from .repos import Repos
+from .repos import MccDac
 
 log = config_logging()
 
 
-class ReadData(Repos):
+class ReadData(MccDac):
     def __init__(self) -> None:
         super().__init__()
 

pyrelacs/repros/mccdac.py

@@ -0,0 +1,286 @@
+from ctypes import Array, c_double
+import time
+from typing import Union
+from IPython import embed
+import numpy.typing as npt
+import uldaq
+import numpy as np
+
+from pyrelacs.util.logging import config_logging
+
+log = config_logging()
+
+
+class MccDac:
+    def __init__(self) -> None:
+        devices = uldaq.get_daq_device_inventory(uldaq.InterfaceType.USB)
+        log.debug(f"Found daq devices {len(devices)}, connecting to the first one")
+        if len(devices) == 0:
+            log.error("Did not found daq devices, please connect one")
+            exit(1)
+        self.daq_device = uldaq.DaqDevice(devices[0])
+        self.daq_device.connect()
+        self.ai_device = self.daq_device.get_ai_device()
+        self.ao_device = self.daq_device.get_ao_device()
+        self.dio_device = self.daq_device.get_dio_device()
+        log.debug("Connected")
+
+    def connect_dac(self):
+        devices = uldaq.get_daq_device_inventory(uldaq.InterfaceType.USB)
+        log.debug(f"Found daq devices {len(devices)}, connecting to the first one")
+        if len(devices) == 0:
+            log.error("Did not found daq devices, please connect one")
+            exit(1)
+        self.daq_device = uldaq.DaqDevice(devices[0])
+        self.daq_device.connect()
+        self.ai_device = self.daq_device.get_ai_device()
+        self.ao_device = self.daq_device.get_ao_device()
+        self.dio_device = self.daq_device.get_dio_device()
+        log.debug("Connected")
+
+    def read_analog(
+        self,
+        channels: list[int],
+        duration: int,
+        samplerate: float,
+        AiInputMode: uldaq.AiInputMode = uldaq.AiInputMode.SINGLE_ENDED,
+        Range: uldaq.Range = uldaq.Range.BIP10VOLTS,
+        ScanOption: uldaq.ScanOption = uldaq.ScanOption.DEFAULTIO,
+        AInScanFlag: uldaq.AInScanFlag = uldaq.AInScanFlag.DEFAULT,
+    ) -> Array[c_double]:
+        assert len(channels) == 2, log.error("You can only provide two channels [0, 1]")
+
+        if channels[0] != channels[1]:
+            buffer_len_channels = 2
+        else:
+            buffer_len_channels = 1
+
+        buffer_len = np.shape(np.arange(0, duration, 1 / samplerate))[0]
+        data_analog_input = uldaq.create_float_buffer(buffer_len_channels, buffer_len)
+
+        er = self.ai_device.a_in_scan(
+            channels[0],
+            channels[1],
+            AiInputMode,
+            Range,
+            buffer_len,
+            samplerate,
+            ScanOption,
+            AInScanFlag,
+            data=data_analog_input,
+        )
+
+        return data_analog_input
+
+    def write_analog(
+        self,
+        data: Union[list, npt.NDArray],
+        channels: list[int],
+        samplerate: float,
+        Range: uldaq.Range = uldaq.Range.BIP10VOLTS,
+        ScanOption: uldaq.ScanOption = uldaq.ScanOption.DEFAULTIO,
+        AOutScanFlag: uldaq.AOutScanFlag = uldaq.AOutScanFlag.DEFAULT,
+    ) -> Array[c_double]:
+        assert len(channels) == 2, log.error("You can only provide two channels [0, 1]")
+
+        buffer = c_double * len(data)
+        data_analog_output = buffer(*data)
+
+        log.debug(f"Created C_double data {data_analog_output}")
+        try:
+            err = self.ao_device.a_out_scan(
+                channels[0],
+                channels[1],
+                Range,
+                int(len(data)),
+                samplerate,
+                ScanOption,
+                AOutScanFlag,
+                data_analog_output,
+            )
+        except Exception as e:
+            print(f"{e}")
+            self.set_analog_to_zero()
+            self.disconnect_dac()
+
+        return data_analog_output
+
+    def set_analog_to_zero(self, channels: list[int] = [0, 1]):
+        try:
+            err = self.ao_device.a_out_list(
+                channels[0],
+                channels[1],
+                [
+                    uldaq.Range.BIP10VOLTS,
+                    uldaq.Range.BIP10VOLTS,
+                ],
+                uldaq.AOutListFlag.DEFAULT,
+                [0, 0],
+            )
+        except Exception as e:
+            log.error("f{e}")
+            log.error("disconnection dac")
+            self.disconnect_dac()
+
+    def diggital_trigger(self) -> None:
+        if not self.read_bit(channel=0):
+            self.write_bit(channel=0, bit=1)
+        else:
+            self.write_bit(channel=0, bit=0)
+            time.time_ns()
+            self.write_bit(channel=0, bit=1)
+
+    def write_bit(self, channel: int = 0, bit: int = 1) -> None:
+        self.dio_device.d_config_bit(
+            uldaq.DigitalPortType.AUXPORT, channel, uldaq.DigitalDirection.OUTPUT
+        )
+        self.dio_device.d_bit_out(
+            uldaq.DigitalPortType.AUXPORT, bit_number=channel, data=bit
+        )
+
+    def read_bit(self, channel: int = 0):
+        bit = self.dio_device.d_bit_in(uldaq.DigitalPortType.AUXPORT, channel)
+        return bit
+
+    def read_digitalio(
+        self,
+        channels: list[int],
+        duration,
+        samplerate,
+        ScanOptions: uldaq.ScanOption = uldaq.ScanOption.DEFAULTIO,
+        DInScanFlag: uldaq.DInScanFlag = uldaq.DInScanFlag.DEFAULT,
+    ):
+        if channels[0] == channels[1]:
+            channel_len = 1
+        else:
+            channel_len = len(channels)
+
+        buffer_len = np.shape(np.arange(0, duration, 1 / samplerate))[0]
+        data_digital_input = uldaq.create_int_buffer(channel_len, buffer_len)
+
+        self.dio_device.d_config_port(
+            uldaq.DigitalPortType.AUXPORT, uldaq.DigitalDirection.INPUT
+        )
+        scan_rate = self.dio_device.d_in_scan(
+            uldaq.DigitalPortType.AUXPORT0,
+            uldaq.DigitalPortType.AUXPORT0,
+            len(data_digital_input),
+            samplerate,
+            ScanOptions,
+            DInScanFlag,
+            data_digital_input,
+        )
+        return data_digital_input
+
+    def disconnect_dac(self):
+        self.daq_device.disconnect()
+        self.daq_device.release()
+
+    def check_attenuator(self):
+        """
+        ident     : attdev-1
+        strobepin : 6
+        datainpin : 5
+        dataoutpin: -1
+        cspin     : 4
+        mutepin   : 7
+        zcenpin   : -1
+        """
+
+        SAMPLERATE = 40_000.0
+        DURATION = 5
+        AMPLITUDE = 1
+        SINFREQ = 1
+        t = np.arange(0, DURATION, 1 / SAMPLERATE)
+        data = AMPLITUDE * np.sin(2 * np.pi * SINFREQ * t)
+        # data_channels = np.concatenate((data, data))
+
+        db_values = [0, 0, -2, -5, -10, -20, -50]
+        db_values = [0, -10, -20]
+        for i, db_value in enumerate(db_values):
+            log.info(f"Attenuating the Channels, with {db_value}")
+            if i == 1:
+                log.info("Muting the Channels")
+                self.set_attenuation_level(
+                    db_value, db_value, mute_channel1=True, mute_channel2=True
+                )
+            else:
+                self.set_attenuation_level(db_value, db_value)
+
+            _ = self.write_analog(
+                data,
+                [0, 0],
+                SAMPLERATE,
+                ScanOption=uldaq.ScanOption.EXTTRIGGER,
+                Range=uldaq.Range.BIP10VOLTS,
+            )
+            self.diggital_trigger()
+
+            try:
+                self.ao_device.scan_wait(uldaq.WaitType.WAIT_UNTIL_DONE, 15)
+                self.write_bit(channel=0, bit=0)
+                self.set_analog_to_zero()
+            except uldaq.ul_exception.ULException:
+                log.debug("Operation timed out")
+                self.write_bit(channel=0, bit=0)
+                self.disconnect_dac()
+                self.connect_dac()
+                self.set_analog_to_zero()
+            finally:
+                self.write_bit(channel=0, bit=0)
+                self.disconnect_dac()
+                self.connect_dac()
+                self.set_analog_to_zero()
+
+            log.info("Sleeping for 1 second, before next attenuation")
+            time.sleep(1)
+
+    def set_attenuation_level(
+        self,
+        db_channel1: float = 5.0,
+        db_channel2: float = 5.0,
+        mute_channel1: bool = False,
+        mute_channel2: bool = False,
+    ):
+        """
+        ident     : attdev-1
+        strobepin : 6
+        datainpin : 5
+        dataoutpin: -1
+        cspin     : 4
+        mutepin   : 7
+        zcenpin   : -1
+        """
+
+        self.activate_attenuator()
+        hardware_possible_db = np.arange(-95.5, 32.0, 0.5)
+        byte_number = np.arange(1, 256)
+        byte_number_db1 = byte_number[hardware_possible_db == db_channel1][0]
+        binary_db1 = np.binary_repr(byte_number_db1, width=8)
+        byte_number_db2 = byte_number[hardware_possible_db == db_channel2][0]
+        binary_db2 = np.binary_repr(byte_number_db2, width=8)
+        if mute_channel1:
+            log.info("Muting channel one")
+            binary_db1 = "00000000"
+        if mute_channel2:
+            log.info("Muting channel one")
+            binary_db2 = "00000000"
+
+        channels_db = binary_db1 + binary_db2
+        self.write_bit(channel=4, bit=0)
+        for b in channels_db:
+            self.write_bit(channel=5, bit=int(b))
+            time.time_ns()
+            self.write_bit(channel=6, bit=1)
+            time.time_ns()
+            self.write_bit(channel=6, bit=0)
+            time.time_ns()
+        self.write_bit(channel=4, bit=1)
+
+    def activate_attenuator(self):
+        for ch, b in zip([4, 5, 6, 7], [1, 0, 0, 1]):
+            self.write_bit(channel=ch, bit=b)
+
+    def deactivate_attenuator(self):
+        # mute should be enabled for starting calibration
+        self.write_bit(channel=7, bit=0)

pyrelacs/repros/output.py

@@ -2,7 +2,7 @@ import ctypes
 
 import uldaq
 from IPython import embed
-from pyrelacs.repros.repos import Repos
+from pyrelacs.repros.repos import MccDac
 from pyrelacs.util.logging import config_logging
 import numpy as np
 import matplotlib.pyplot as plt
@@ -10,25 +10,16 @@ import matplotlib.pyplot as plt
 log = config_logging()
 
 
-class Output_daq(Repos):
+class Output_daq(MccDac):
     def __init__(self) -> None:
         super().__init__()
-        # devices = uldaq.get_daq_device_inventory(uldaq.InterfaceType.USB)
-        # self.daq_device = uldaq.DaqDevice(devices[0])
-        # self.daq_device.connect()
 
     def write_daq(self):
         log.debug("running repro")
         time = np.arange(0, 10, 1 / 30_000.0)
-        data = 2 * np.sin(2 * np.pi * 1 * time)
+        data = 1 * np.sin(2 * np.pi * 1 * time)
-        self.send_analog_dac(
+        self.write_analog(data, [0, 0], 30_000, ScanOption=uldaq.ScanOption.EXTTRIGGER)
-            data, [0, 0], 30_000, ScanOption=uldaq.ScanOption.EXTTRIGGER
+        self.diggital_trigger()
-        )
-
-    def trigger(self):
-        self.digital_trigger(1)
-        self.daq_device.disconnect()
-        self.daq_device.release()
 
 
 if __name__ == "__main__":

pyrelacs/repros/repos.py

@@ -1,142 +0,0 @@
-from ctypes import Array, c_double
-from typing import Union
-from IPython import embed
-import numpy.typing as npt
-import uldaq
-import numpy as np
-
-from pyrelacs.util.logging import config_logging
-
-log = config_logging()
-
-
-class Repos:
-    def __init__(self) -> None:
-        devices = uldaq.get_daq_device_inventory(uldaq.InterfaceType.USB)
-        log.debug(f"Found daq devices {len(devices)}, connecting to the first one")
-        if len(devices) == 0:
-            log.error("Did not found daq devices, please connect one")
-            exit(1)
-        self.daq_device = uldaq.DaqDevice(devices[0])
-        self.daq_device.connect()
-        log.debug("Connected")
-
-    def read_analog_daq(
-        self,
-        channels: list[int],
-        duration: int,
-        samplerate: float,
-        AiInputMode: uldaq.AiInputMode = uldaq.AiInputMode.SINGLE_ENDED,
-        Range: uldaq.Range = uldaq.Range.BIP10VOLTS,
-        ScanOption: uldaq.ScanOption = uldaq.ScanOption.DEFAULTIO,
-        AInScanFlag: uldaq.AInScanFlag = uldaq.AInScanFlag.DEFAULT,
-    ) -> Array[c_double]:
-        if channels[0] == channels[1]:
-            channel_len = 1
-        else:
-            channel_len = len(channels)
-        assert len(channels) == 2, log.error("Please provide a list with two ints")
-
-        ai_device = self.daq_device.get_ai_device()
-        buffer_len = np.shape(np.arange(0, duration, 1 / samplerate))[0]
-        data_analog_input = uldaq.create_float_buffer(channel_len, buffer_len)
-
-        er = ai_device.a_in_scan(
-            channels[0],
-            channels[1],
-            AiInputMode,
-            Range,
-            buffer_len,
-            samplerate,
-            ScanOption,
-            AInScanFlag,
-            data=data_analog_input,
-        )
-        # ai_device.scan_wait(uldaq.WaitType.WAIT_UNTIL_DONE, timeout=-1)
-
-        return data_analog_input
-
-    def send_analog_dac(
-        self,
-        data: Union[list, npt.NDArray],
-        channels: list[int],
-        samplerate: float,
-        Range: uldaq.Range = uldaq.Range.BIP10VOLTS,
-        ScanOption: uldaq.ScanOption = uldaq.ScanOption.DEFAULTIO,
-        AOutScanFlag: uldaq.AOutScanFlag = uldaq.AOutScanFlag.DEFAULT,
-    ):
-        """
-
-        Parameters
-        ----------
-        data : Union[list, npt.NDArray]
-
-        channels : list[int]
-
-        duration : int
-
-        samplerate : float
-
-        AiInputMode : uldaq.AiInputMode
-
-        Range : uldaq.Range
-
-        ScanOption : uldaq.ScanOption
-
-        AInScanFlag : uldaq.AOutScanFlag
-
-
-        Returns
-        -------
-        Array[c_double]
-        ao_device
-
-
-        """
-        buffer = c_double * len(data)
-        data_analog_output = buffer(*data)
-
-        log.debug(f"Created C_double data {data_analog_output}")
-        ao_device = self.daq_device.get_ao_device()
-        ao_info = ao_device.get_info()
-
-        err = ao_device.a_out_scan(
-            channels[0],
-            channels[1],
-            Range,
-            int(len(data)),
-            samplerate,
-            ScanOption,
-            AOutScanFlag,
-            data_analog_output,
-        )
-        log.info(f"The actual scan rate was {err}")
-        # ao_device.scan_wait(uldaq.WaitType.WAIT_UNTIL_DONE, 11)
-
-        return data_analog_output, ao_device
-
-    def digital_trigger(self, portn: int = 0, data: int = 1) -> None:
-        log.info(f"{self.daq_device}")
-        dio_device = self.daq_device.get_dio_device()
-
-        dio_device.d_config_bit(
-            uldaq.DigitalPortType.AUXPORT, portn, uldaq.DigitalDirection.OUTPUT
-        )
-
-        dio_device.d_bit_out(uldaq.DigitalPortType.AUXPORT, bit_number=portn, data=data)
-
-    def disconnect_dac(self):
-        self.daq_device.disconnect()
-        self.daq_device.release()
-
-    def clean_up():
-        pass
-
-    def run_repo(self) -> None:
-        pass
-
-    def stop_repo(self) -> None:
-        pass
-
-    def reload_repo(self) -> None:
-        pass